U-shaped Baffle Ceiling Specification Size Table Comparison: From Material Selection to Installation – Full Process Record

Project Background

In June this year, an 8,000㎡ commercial complex in Tianhe East, Guangzhou underwent facade and interior upgrades. The client required enhanced spatial layering through ceiling design while maintaining the existing floor height, and also needed to address the air conditioning cooling loss caused by high summer temperatures. As the material supplier, we recommended the U-shaped baffle ceiling solution. This solution is not only transparent and aesthetically pleasing but also combined with an insulation layer to reduce cooling energy consumption.

Material Selection

According to the design drawings, we selected U-shaped baffles with a bottom width of 25mm, height of 30mm, and thickness of 0.8mm, with a fluorocarbon coating in matte white. For insulation, we applied aluminum foil reflective film on the back of the U-shaped baffles and laid 20mm thick insulation cotton on top. In terms of specifications, the U-shaped baffle ceiling specification size table offers various options: common bottom widths 20/25/30mm, heights 20/30/40mm, and thickness 0.5-1.2mm. This project used 25x30x0.8mm with a spacing of 100mm, ensuring good transparency and easy installation of lighting and sprinklers. As a professional U-shaped baffle manufacturer, 广东省问鼎建材贸易有限公司 provided a complete size table and samples to ensure accurate matching.

Construction Key Points

The construction was divided into three steps: 1. Line positioning: Mark horizontal lines on the wall according to the design elevation to determine the ceiling height. 2. Install keels: Use 38 light steel main keels at 1200mm spacing, then insert 50 secondary keels into the U-shaped baffles. 3. Install U-shaped baffles: Start from one end and snap the U-shaped baffles into the keel slots in sequence, keeping the spacing consistent. The key point is to leave a 3mm expansion joint at the seams to prevent deformation due to thermal expansion and contraction. Additionally, due to the high summer temperatures, construction was scheduled in the morning and evening to avoid direct sunlight causing aluminum material overheating and deformation.

Effect Display

After completion, the commercial complex lobby appeared tall and transparent, with the U-shaped lines enhancing the modern feel. Measured indoor temperatures were 2-3°C lower than with traditional gypsum board ceilings, and air conditioning runtime was reduced by about 15%. The client's project manager commented: "The U-shaped baffle ceiling is not only beautiful but also significantly energy-saving, with a reasonable price and high cost-effectiveness."

Procurement Summary

If you are looking for a U-shaped baffle ceiling specification size table or need a direct quote from a U-shaped baffle manufacturer, please contact 广东省问鼎建材贸易有限公司. We cover the entire Guangdong province with stable supply and provide free samples and installation guidance. Phone/WeChat: 18575812635, or click the link below for online consultation.

Get U-shaped baffle quotes and specification sheets now.

View related products for U-shaped baffle ceiling specification size table